The Best Table Saw Under $500 In 2022 – Reviews & Buyers Guide

Last Updated on October 21, 2021

There’s probably not a more accurate way to cut pieces of wood than using a table saw. Getting a decent model, though – that can be pretty expensive.

But if you don’t want to spend much and still get decent quality, then you can always opt for the best table saw under 500. It won’t cost you as much as a high-end model, and will still deliver fantastic quality.

And sure enough, the cutting, the precision, and the convenience will also be there.

In this article, you’ll find everything there’s to know about table saws under 500 and some more. If you’re looking for one of these – then you’ll find the perfect option below. Take a look!

Best Table Saw Under $500 – Comparison

ImageProduct NamePrice
DEWALT DCS7485T1 FLEXVOLT 60V MAX Table Saw KitDeWALT DCS7485T1 FLEXVOLT 60V Max Table SawCheck Price
Rockwell RK7241S Table Saw with LaserRockwell RK7241S Table Saw with LaserCheck Price
Bosch 10-Inch Portable Jobsite Table Saw GTS1031 with One-Handed Carry HandleBosch GTS1031 10-Inch Portable Jobsite Table SawCheck Price
SKILSAW SPT70WT-01 10 In. Portable Worm Drive Table SawSKILSAW SPT70WT-01 Portable Worm Drive Table SawCheck Price
ShopSeries RK7240.1 13-Amp 10 inch Table Saw with StandShopSeries RK7240.1 13 Amp Table Saw with StandCheck Price
Tacklife PTSG1A 10 inch Table Saw with Max ExtendableTacklife PTSG1A 10 Inch Table SawCheck Price

6 Best Table Saw Under $500 Reviews

We wanted to pick a total of 10 table saws for this article. But we couldn’t find that many quality models to consider. So, we only chose 6 amazing table saws that will surpass your expectations. Want to know more about each? Here’s a review of each one of them:

1. DeWALT  FLEXVOLT 60V Max Table Saw



  • Speeds: 5800 RPM
  • Rip Capacity: 24 inches
  • Dimensions: 12.9 x 23.8 x 23.8 inches
  • Weight: 48 lbs
  • Warranty: 3 Year Limited

Check Latest Price

The DeWALT DCS7485T1 FlexVolt is a superb model in every way. In contrast with almost all other table saws in the market, this one is totally cordless. That means you won’t have to worry about using it close to an outlet.

Its FlexVolt system is something unbeatable considering the freedom and overall convenience you get with it. Moreover, it boasts a 120V MAX battery that works just like any 20V MAX model, but at a higher pace and power.

In fact, it offers up to 24-inches of rip capacity so you can cut big pieces of wood without problems. Despite being cordless, it still manages to cut deep and effectively – even thick pieces of wood.

But power and efficiency is not everything this table saw offers. You will also get a telescopic fence with rack and pinion for smooth adjustments. The accuracy and ease of use will help you in the hardest of jobs.

And sure enough, it still comes with a metal roll cage base that ensures you can place this machine everywhere you want. With the cordless design and a total weight of 48 pounds, you can bring it almost anywhere.

It doesn’t leave safety behind either. You get a power-loss reset switch that prevents the machine from restarting by itself. If you leave the switch in ON, then you won’t have to worry about accidents.

Apart from all that, it boasts on-board storage for the fences, miter gauge, push stick, and riving knife. Pairing everything it offers – this is a magnificent cordless table saw not to dismiss.

  • Unbeatable power for a cordless design
  • Decent rip-cut capacity at 24-inches
  • Easy adjustments with telescopic fence
  • Light and reliable build for portability
  • Batteries can be pretty expensive
  • It has no place to carry battery chargers

2. Rockwell RK7241S Table Saw with Laser

Rockwell RK7241S Table Saw with Laser


  • Speeds: 4800 RPM
  • Rip Capacity: 30 inches
  • Dimensions: 38.8 x 27.6 x 18 inches
  • Weight: 88 lbs
  • Warranty: 2 year Limited

Check Latest Price

Using a table saw doesn’t have to be a messy and complicated job. That’s what the Rockwell RK7241S stands for.

It comes with a Laser Guide technology that tells you where to make the best cuts. If you appreciate accuracy and results, then you’ll love a machine that automatically adjusts to help you make utterly precise cuts.

You can still enjoy a superb cutting performance. It comes with a 15 AMP motor that spins the blade at up to 4,800 RPM. That’s enough to cut even 4-inches thick pieces of wood. And you will still get a cutting depth of 3.56-inches at 90 degrees if needed – or 2.56-inches at 45 degrees.

Yet, it is the addition of extra accessories like the miter gauge, rip fence, riving knife, and push stick that makes it so amazing. Add up the dust bag, and you’ll get the chance to enjoy a super clean experience while sawing.

The machine still boasts a trolley system. You can transport this machine with ease at any time. And with a quick-folding stand, you can store the machine with even more ease whenever you want.

Add up the onboard storage, and you’ll have the chance to get all the accessories inside, as well, for extra convenience.

Its portable design, convenient laser guide, and set of accessories make it an excellent product in its entirety. Want to take your wood-cutting results to another level without spending a fortune? The Rockwell RK7241S is a high-quality model to consider.

  • Superb power for practical and neat cuts every time
  • Ideal cut depth and angle adjustments with accessories
  • Highly convenient trolley design with foldable table
  • Outstanding LaserGuide technology for precision
  • Extra-heavy and challenging to lift at 80 pounds
  • Rough table surface makes it hard to slide wood

3. Bosch GTS1031 10-Inch Portable Jobsite Table Saw

Bosch 10-Inch Portable Jobsite Table Saw GTS1031 with One-Handed Carry Handle


  • Speeds: 5000 RPM
  • Rip Capacity: Left 8-1/2″, Right 18″
  • Dimensions: 26 x 24.8 x 15.5 inches
  • Weight: 57.3 lbs
  • Warranty: 30-day money back guarantee, 1 year

Check Latest Price

When it comes to quality brands, there’s one we can’t ever leave behind: Bosch. And with the GTS1031, it is not a surprise why.

This is a portable yet highly powerful model for those willing to get exceptional results. It boasts a 4 HP motor delivering 15 AMP – that’s enough to get 5,000 RPM without problems.

Then you’ll get 3.25-inches of depth at 90-degrees and 2.37-inches of depth at 45-degrees. Together, they make it clear that this saw can cut deep enough no matter the type of wood.

This comes up directly from the 10-inches carbide blade with 24 teeth. That’s enough for a rip capacity of 18-inches in total. If you want to enjoy deep cuts every time – this machine won’t let you down.

Yet, it is not only the power and cutting capacity but the wide array of precision tools it offers. You get a square-lock rip fence with a self-aligning design. That pairs up well with the Smart Guard system, the anti-kickback pawls, and a riving knife – so you’ll have full control in every cut.

The table saw is still one of the strongest you can get. It boasts a steel base that withstands impacts and provides excellent stability.

Sure enough, the machine is totally portable with a carry handle, compact design, and a total weight of just over 50 pounds.

Overall, you can enjoy one of the most practical models without wasting a single buck. And it comes from Bosch – so that’s a huge positive you’ll want to think about.

  • Outstanding power with 4 HP motor for smooth cutting
  • Excellent portability with decent weight and handy design
  • Reliable and precise adjustment system
  • Sturdy and reliable construction for durability
  • The table is not the most comfortable to work with
  • Fence system is not perfectly flush

4. SKILSAW SPT70WT-01 Portable Worm Drive Table Saw

SKILSAW SPT70WT-01 10 In. Portable Worm Drive Table Saw


  • Weight: 49 lbs
  • depth of cut: 3-1/2 inch
  • Rip Capacity: 25 inches
  • Dimensions: 19.9 x 23.4 x 13.4 inches

Check Latest Price

Now coming with the best table saw under 500 dollars, we had to bring a Skilsaw machine. This time, we meet the SPT70WT-01.

This is a portable model with a Worm-Drive system. That means it will cut things in the smoothest of ways. And it all comes down to a 15 AMP motor along with 5,300 of total RPM. Together, they ensure superb effectiveness in every cut and not a single consistency problem.

The saw boasts a 25-inch rip capacity in total. And with 3.5-inches of cut depth – you can expect to get through thick pieces of wood without problems.

But its power is not everything it stands out for. You will also get several accessories and features for precision, such as a self-aligning rip fence. Sure enough, you get a decent dust port for a secure connection and cleaner cutting experience.

Apart from that, the machine is utterly durable. You get an all-steel roll cage that protects and keeps it stable at all times. And with the cast-aluminum top, you can expect a smooth surface and more durability – even under challenging conditions.

Despite all that, you still get a decently light model at 49 pounds. That’s small enough to move it around with ease – no matter where you are.

The machine is also safe, cuts effectively, and leaves no space for mediocre results. If you want something affordable that still manages to achieve fantastic quality – then this model won’t let you down.

  • Excellent power with 15 AMP motor and 5,300 RPM
  • Top-notch rip capacity at 25-inches with 3.5-inches depth
  • Durable build with aluminum and steel
  • Super light and easy to transport design at 48 pounds
  • Its fence is not the most precise out there
  • The small table makes it a little uncomfortable to work with

5. ShopSeries RK7240.1 13 Amp Table Saw with Stand

ShopSeries RK7240.1 13-Amp 10


  • Motor: 13 amp
  • Dimensions: 28.5 x 28.2 x 21 inches
  • Weight: 41.8 pounds
  • Warranty: 2 year Limited

Check Latest Price

Getting quality at this price point is not easy. Luckily, there are always great table saws to consider – such as the RK7240.1 from ShopSeries.

A 10-inches model with 13 AMP of total motor power will not let you down in terms of cutting capacity. You can enjoy a total of 2.5-inches of 45-degree cut depth, and up to 3-inches at 90-degrees. That’s enough for all types of wood pieces.

The machine boasts an adjustable tungsten carbide blade. It is hard enough to cut a wide array of woods and last a sufficient time. Yet, the real advantage comes from the bevelling system that lets it cut at 45 and 90 degrees when needed.

This pairs up well with an excellent adjustment system, going from the rip fence to the miter gauge, a push stick, and a blade fench.

You will also get a super-light machine overall. It weighs as little as 35 pounds so you can move it around when needed.

Apart from all that, it boasts a cast-aluminum table build for smoothness and durability. If you want to cut with ease and enjoy superior strength, this is the model to go for.

It is easy to use, reliable, decently powerful, and pretty convenient. Getting the best results won’t take much effort with this machine.

  • Super light and easy to move around
  • Ideal adjustments with versatile accessories
  • Decent power for the price and size
  • Reliable and smooth aluminum table
  • The blade is not the most durable out there
  • Its fence doesn’t line up straight

6. Tacklife PTSG1A 10 Inch Table Saw

Tacklife PTSG1A 10


  • Motor: 15 Amps
  • Speeds: 4800 RPM
  • Dimensions: 23.6 x 21.6 x 13.4 inches
  • Weight: 57 lbs
  • Warranty: 2 years

Check Latest Price

Want to spend little money and still get decent results? Then the PTSG1A table saw will come like a gem for you.

It is a pretty useful table saw with a 15 AMP motor that can deliver up to 4,800 RPM in total. That’s enough to cut hardwoods and other thick materials with ease.

Moreover, it boasts a 0 to 45-degree adjustment system. And with a cut depth of 3.125-inches at 0-degrees and 2.25-inches at 45-degrees – you can enjoy super practical cuts at all times.

And the precision won’t be too bad either. You get an extendable table made of cast-aluminum. It lets you move wood pieces with ease and cut consistently using the rule, fence, and miter gauge.

To make it even better, you get on-board storage for all the accessories. From the rip fence to the miter gauge, you can save them all inside.

And sure enough, it boasts a super safe system with a blade guard. Along with an overload protection system, you won’t have to worry about cutting frozen or wet woods.

Finally, you get a decent dust-collection system that pairs up well with 1.5-inches hoses. Pair that up with the rest of its features, and you get one of the most convenient models in every way.

That’s enough to say that this model will be totally worth it for your money – no need to waste a single buck on expensive table saws when this one is available.

  • Ideal power for fast and smooth cutting every time
  • Perfect cut depth at up to 3-inches in 45-degrees
  • Super-safe to use with blade guard and overload protection
  • Practical design with on-board storage and dust collection port
  • Adjustment system takes more time than expected
  • The blade tends to wobble a little

What to Look for Before You Buy

There are many features you will encounter when trying to find the best table saw for under 500.If you don’t know what these features are all about – then you won’t be able to pick the right model.

Luckily for you, we’re here to explain what you should consider and why. Here are the factors to look for before buying:


The power of a table saw is measured in HP (horsepower) and/or AMPs. Most models will come with an AMP measure and some of them with HP.

Be sure to know that a high-powered table saw doesn’t necessarily mean it is better. But a powerful model is undoubtedly better than an underpowered one.

So, we recommend going for models offering at least 3 HP of power or 13 AMP. That’s enough to get most jobs done. For the best experience, go for table saws offering 4 HP and/or 15 AMP.


Apart from the power, you’ll find that table saws also have a specific speed. This speed refers to how fast the blade will spin.

A fast blade doesn’t mean that the saw is better. But sure enough, if it has too little speed, then cutting smoothly and neatly won’t be possible.

We recommend staying between 4,000 and 5,000 RPM if you want a decent experience. Anything below that will not provide enough smoothness and over that will probably make the blade wobble, which reduces precision.


The blade is the most crucial part of power and speed. Here, you should focus on a well-made model with carbide construction that stands lots of use.

But you must also consider the number of teeth (we recommend 24 teeth), and a total diameter of no less than 10 inches. This should give you no less than 20-inch of rip capacity and at least 3.5-inches of total depth per cut. That will be enough to get the right table saw with a proper blade.

Size and Weight

After considering the cutting capabilities of the machine, you must consider the size and weight of the machine.

Overall, we recommend models that don’t weigh more than 55 pounds. If you can pick something between 45 and 50 pounds, then that would be even better.

Another factor to consider is a decently-sized design. If you can move the table saw around with ease, then that is a model to go for.


If the table saw is powerful and cuts deep, it doesn’t necessarily mean it is accurate. That’s why you must consider precision features, as well.


The table is the first thing to think about. We recommend aluminum tables for smoothness that lets you move the wood piece around with ease.


A fence needs to be square and flush. That will let you adjust the wood piece accurately and make sure every straight cut is as precise as possible. Rack and pinion fences are excellent because they lock the fence and move the saw only for extra consistency.

Miter Gauges

These go on the table as well, helping to make cuts that are not 90 degrees. If you want to cut angles at different angles between 45 and 90 – then make sure to have a reliable miter gauge.


Lastly, consider the beveling feature of the machine. You must ensure it offers the chance to change angles when needed. That won’t be the most useful of features but can provide tons of versatility.

Safety Tips for Using a Table Saw

Even if you get the best portable table saw under 500,  you will still need to know how to use it safely.
Here are some of the best safety tips to use a table saw without accidents:

  • Always wear safety accessories. From glasses and goggles to dust mask, and even a face shield. Make sure you’re totally protected when using a table saw.
  • Do not wear long sleeves or loose clothing. Jewelry or any loose-fitting accessory can also be dangerous while using. Prevent the use of anything that fits loosely that could get stuck in the blade.
  • Wear anti-slippery footwear. We recommend non-slip security boots as the best option. Also, remember to stand firm and get rid of any obstacle and/or thing that could trip you while working.
  • Place the table saw on a stable surface. Do not use them on anything that wobbles or does not resist the movement of the saw. That will put you in grave danger.
  • Make sure of the blade guard, fence, push-stick, and other safety accessories on the machine. Read the instructions to learn more about them if needed.
  • Keep your hands off the blade at all times. This means not reaching over or behind the blade when it is spinning.
  • Always turn the switch OFF after using the machine. Unplug and store if needed, especially if there are children around.

Frequently Asked Questions

Most table saws are so complicated that they will surely leave you with some questions. Here are some of them with their respective answers:
Q: Is it safe to use a table saw with no prior experience?
A: Yes, and no. Table saws are made to be used by almost anyone as long as he/she follows the right precautions. However, it is necessary to understand the mechanism before using it to prevent any accidents.

Q: Are table saws blades replaceable?
A: Yes, almost all table saws offer the chance to change the blades when they’re worn off, or you just want to use a different type.

Q: Can I make cross-cuts and miter cuts in a table saw?
A: Yes, you can make all kinds of cuts with most table saws. Make sure to have a rip fence, miter gauge, and square for that.

Q: How much time does it take to assemble a table saw?
A: It depends. Some models can take anywhere from 30 minutes to 2 hours. But others may demand a little more work, up to 4 hours or more. Get a model with easy-to-follow instructions and simple design if you don’t want to waste any time assembling it.

Q: What’s the difference between a table saw and other saws?
A: The main difference is that a table saw is indeed on a table. Other types of saws offer more mobility but less precision.

So, What Should You Buy

With so many things to consider, you may end up all confused and in a tangle trying to pick the right model. But don’t worry – we’re here to help.

For us, the Bosch GTS1031 Portable Jobsite Table Saw is the best one you can go for. From its power to its cutting capacity and even the ultra-portable design – it takes the throne as the best table saw under 500 on this list.

Yet, you can always go for the DeWALT DCS7485T1 FLEXVOLT Table Saw and get something similar in power and convenience. However, this one stands out for its cordless design, offering a uniquely functional performance.

But overall, it all comes down to your needs. As long as you pick something that meets your standards and overall requirements, then that’s the model for you. Choose accordingly, and you won’t be disappointed.

Other Buying Guides: