12 Table Saw Accessories You Must Have (For woodworking & DIY)

Last Updated on October 12, 2021

A table saw is a very powerful and useful tool. However, like all tools, they require a good deal of maintenance and some help in the form of accessories that can increase their versatility and general performance.

If you have bought a table saw or are planning on buying one, you can look through this checklist of twelve must-have table saw accessories to see which ones you have and which ones you need to buy.

Table Saw Accessories You Must Have

Here we’ll talk about the Bestable saw accessories you absolutely need.

Basic Accessories

These are some accessories that anyone who works with a table saw should have at the very least. They are mandatory to the operation of the power tool at times, and spares should be kept in case your main one is damaged or lost. The basic accessories are:

1.  Saw Blades

A table saw’s most essential component is the saw blade. While the default blade that comes with a table saw’s purchase is usable, most users of this tool will tell you to keep spare blades.

One should be aware that there are many different saw blades for different utilities. Different types of blades have different shapes and number of saw teeth. Some blades work better on some materials than others.

If you are just starting, the different types of blades might confuse and overwhelm you. In the beginning, your best option is to just keep buying spare versatile blades.

These types of blades work with most materials and aren’t specially catered to cutting one or two materials. They’re a good beginner’s option and often are better in quality than default blades.

Maintaining The Blade

If you’re buying a saw blade, it will also help you to buy some complementary tools. Usually, the purpose of these additional tools is to maintain the blade, which is essential if you want to continue working with them efficiently.

Among these tools are lubricants. It is recommended to buy WD-40. Make sure to lubricate your blade after each use and wipe it away after a few minutes. This will help prevent rust and keep your blade working properly.

In case your blade does have rust, you can use a razor or rust remover to help remove it. Use them to carefully scrape off the rust. You can also opt to use 320 grit sandpaper.

Finally, you should also have a triangular file to sharpen the saw blade. This is to keep the saw tooth sharp on your blade and maximize cutting efficiency. A dull blade will serve you no good.

2.  Rip Fences

It is probably the second most essential accessory to have alongside your table saw blades. A rip fence, as the name suggests, is a fence of the sort that helps you in making basic cuts.

A rip fence is essentially a guide for your table saw as it helps hold it steady and leads it through the material as it cuts through. This fence runs from the front of the table to the back and is parallel to the table saw’s blade.

To use a rip fence, you need to mount or attach it to the table saw. This is usually done on the right side of the blade. Most rip fences nowadays allow you to make use of both sides, and as such, make it easier to use.

If you’re starting out, you will find the best use out of a T-square fence. These are made of steel and resemble the letter T. They allow operation of the saw blade on both sides, are easy to operate and can make both vertical and horizontal cuts. T-square rip fences need to be welded to the surface you are cutting.

After welding them, you can proceed to attach the blade. When deciding to buy a rip fence, one should be aware of the rip capacity. The rip capacity is the distance from the saw blade to the edge of the fence. Generally speaking, a rip capacity of 24 inches will serve you well in almost all scenarios.

You should also check to see if they are lightweight and easy to handle or not. Alongside this fence, it might help to get some wax if the rip fence becomes too rigid. A rigid fence will prevent your saw from working to its full potential. Applying some wax or oil might help to reduce the rigidness and friction.

3.  Miter Gauge

A rip fence is used to make horizontal cuts and/or vertical cuts, but what about cuts at an angle? For that, you will need to make use of a miter gauge.

Cuts made at an angle are often used to make a corner or a joint. This type of cut is often made at a precise angle of 45 degrees, and it is often impossible to obtain the necessary precision or accuracy without a tool.

When buying a miter gauge, make sure to buy a standard one and not a proprietary one. A standard miter gauge has more compatibility.

To use a miter gauge, you need to insert it into the table saw by properly aligning the front of it. You can then adjust the angle using the locking mechanism. And you’ll see a gauge with a reading from -45 degrees to 45 degrees, which you can use to adjust the angle.

When using this tool, make sure the blade is steady and that the material is being pushed to the blade. You can use a clamp to hold the material down and make sure it is steady. If your material isn’t steady, your cut won’t be to your desired angle.

An alternative is to get digital angle measures for greater ease of use and greater accuracy. They will also help prevent parallax errors when taking measurements.

4.  Dial Indicator

A dial indicator is mostly used to make sure all your instruments and your working surface is level or not. These have a high degree of accuracy, and one can easily adjust the surface to make sure it is level.

These indicators are also helpful in setting jointer blades, and both beginners and experts alike can make great use out of it.

Safety and Cleaning Accessories

Power tools like the table saw are somewhat dangerous. You should make sure you know the proper guidelines on how to use it. Even so, it is in your best interest to keep these safety accessories present in your workplace at all times to reduce any chance of injury.

5.  Push Sticks and Pads

Pushing the material through the saw blade is an integral part of the process. Doing it by hand is a very dangerous task and should be avoided. An alternative and much better option are using either a push stick or pad.

A push stick is used to push the stock through the blade. It provides much better leverage and ease of use alongside being much safer. A push pad does a similar job, but it is flat and has a grip to work with. Push pads prove superior when you need extra grip or need to cut grooves on the workpiece.

Both provide a degree of safety and added functionality to your table saw, and so it should be considered.

6.  Throat Inserts

These are small pieces of wood or metal with a slit in them. They are used to prevent debris or outside materials from entering the blades and damaging or slowing them down.
Most table saws come with a default factory throat insert, but it is often better to buy a specially made one to fit your blade. And most of these inserts are made to not hinder the movement of your blade and protect it from debris. A custom made zero clearance insert for your particular blade is recommended.

Having your blade clogged or debris stuck can be quite dangerous and can lead to grave injuries if left unattended. Even with these in place, you should stop and check for any debris stuck in the blade from time to time.

7.  Feather Boards

These are boards that can help clamp or hold a piece of material down and make sure it is steady. Making sure the piece of material is steady during the cutting process is essential to ensure a clean cut.

Most modern feather boards have clamps or magnets for better holding power and ease of use. See which one you are most comfortable using and make sure they hold down the material properly.

Working on an unsteady material can prove to be a grave mistake. Never do that, as in the case of it tilting, it will no doubt have hazardous consequences.

8.  Saw Dust Collector

This is a handy accessory to have if you have a hard time sweeping away sawdust. You need to simply put it under the table saw, and it will functionally work as a trash chute for sawdust. Simply replace it from time to time to prevent the build-up of sawdust.

9.  Blade Guard

A blade guard, as the name suggests, protects the blade from outside contact. When opting to buy a blade guard, it is recommended to buy a transparent or see-through blade guard. This both protects the blade as well as makes sure you can see and follow the blade as it cuts through the material.

Accessories Providing Advanced Functionality

These accessories are often for more advanced tasks, and beginners can often forgo these as they will not find much use at the start. However, for people who have experience in using table saws, they will see much use in these.

10.  Mobile Base

Mobile bases are helpful if you want to add a degree of portability to your table saw. They can make the table saw and base much easier to move, and you can work in different places thanks to this.

When looking for a suitable mobile base, make sure to get one with lockable wheels and adjustable height. These features ensure maximum functionality and use. They allow you to work more flexibly.

11.  Table Saw Sled

This accessory is best used if you do regular crosscutting or cutting against the grain. Sleds make it much easier to do this. They have miter gauges that allow you to cut at angles without risk of harming yourself.

Sleds can be quite hard to use for beginners and, as such, is not recommended to pick up initially.

Table saw sleds can be custom-made by yourself by referring to tutorials, or you can opt to buy one if necessary. If one is opting to buy or make one, ensure that you use a hardwood like oak as they are dense and durable. They are not easily distorted and will allow the sled to glide smoothly.

12.  Dado Blades

These are a special type of blades used to cut notches or grooves on the edge of a board. And these work like normal saw blades but have shims and a number of chippers that help make the notches or grooves.

Beginners will probably not start woodworking by making notches, and so they can choose to avoid this type of blade. However, expert woodworkers will often find this as a good investment.

Make sure to get one with a fine-tuning wheel to make the best out of its use. The best option is a wheel that offers .004 inches click increments. This will serve you for almost all different types of materials and jobs.

Final Thoughts

While there might be more accessories that will help you maximize the efficiency of your table saw, these twelve accessories are recommended by most and usually serve the table saw owners the best.

As a result, it is hard for one to go wrong with these twelve accessories, and these should be available at any workspace or shop.